Connecting External Video Sources
The RIGHT SIDE panel jacks are provided as a convenience to allow you to easily connect HDMI or DVI signals from a DVD, Set Top Box , Video Game as shown in the following examples (When connecting DVI signal it will
need to connect the audio output into the Left Side Input jacks) :
A)Connecting HDMI signal. Right Side Panel
B) Connecting DVI signal.
Right Side Panel | Left Side Panel |
First
HDMI DIGITAL
OUTPUT CAPABILITY
DVD , Set Top Box,
Video Game Console.
Note : Special device cables will be according to the own device specifications.
INPUT 5
R | L/MONO | PR | PB |
|
| AUDIO | Y / VIDEO | ||
|
|
|
|
DVI to HDMI
Cable
DIGITAL OUTPUT | OUTPUT | ||
R | L | ||
| |||
Back of
HDTV
DVD Player
DVI DIGITAL
OUTPUT CAPABILITY
DVD , Set Top Box,
Video Game Console.
time use
NOTE: 1. Completely insert connection cord plugs when connecting to side panel jacks. If you do not, the played back picture may be abnormal.
The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set Top Box to your Plasma TV is dependent on the model and features of each component. Check the owner’s manual of each component for the location of video and audio inputs and outputs.
The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your particular assortment of components and features. For best performance, video and audio cables should be made from coaxial shielded wire.
Before Operating External Video Source
Connect an external source to one of the INPUT terminals, then press the INPUTS button to show the
INPUTS menu. Use the CURSOR PAD ( | and ) to select the Input of your choice. Then press |
the SELECT button or the CURSOR PAD | to confirm your choice (see page 28). |
Photo Input
IEEE 1394
Air /Cable
Input 1
Input 2
Move | SEL Sel. |
15
