English

INSTALLING BATTERY FOR LASER GUIDE (Fig. C-1)

1.Open the cover (1) of battery compartment by sliding cover towards switch.

2.Install 2 pieces of 1.5V batteries into the battery compartment according to the polarity indicated on compartment.

3.Close the cover

4.Turn on the switch (3) to check the LASER GUIDE

OPERATION.

NOTE: Replace the batteries with batteries that have a reating of 1.5 volts (Number 4 sereis and AAA size or equivalent). When replacing the batteries, the laser guide should be thoroughly cleansed. Use a soft paintbrush or similar device, to remove all sawdust and debris.

Fig. C-1

3

1

2

INSTALLING THE HEAD (Fig. D)

WARNING

The Drill Press head is very heavy and MUST be lifted witht he help of 2 PEOPLE OR MORE to safely assemble the Drill Press head on the column.

1.Carefully lift the head (1) above the column (2) and slide it onto the column. Make sure the head slides down over the column as far as possible. Align the head with the base.

2.Using the hex wrench, tighten the two head lock set screws (3).

Fig. D

1

3

2

INSTALLING FEED HANDLES (Fig. E)

1.Locate the three feed handles in the loose parts bag.

2.Screw the feed handles (1) into the threaded holes (2) in the hub (3). Tighten.

Fig. E

2

3

1

INSTALLING THE CHUCK (Fig. F and G)

WARNING

Before any assembly of the chuck and arbor to the drill press head, clean all mating surfaces with a non-petroleum based product; such as alcohol or lacquer thinner. Any oil or grease used in the packing of these parts must be removed, otherwise the chuck may come loose during operation.

1.Open the jaws of the chuck (1) by rotating the chuck sleeve clockwise. To prevent damage, make sure the jaws are completely receded into the chuck.

Fig. F

2

1

2.Push the chuck (1) onto the spindle (2).

NOTE: Clean the spindle taper with a non-alcohol based cleaner before inserting it into the chuck.

3.Using a rubber mallet, plastic-tipped hammer, or a block of wood and a hammer, firmly tap the chuck upward into position on the spindle shaft.

Fig. G

– 12 –

Page 11 Page 13
Page 12
Image 12
Hitachi B13F Installing Battery for Laser Guide Fig. C-1, Installing the Head Fig. D, Installing Feed Handles Fig. E
Page 11 Page 13

B13F specifications

The Hitachi B13F is a versatile and robust benchtop drill press designed to meet the demands of both professionals and hobbyists in various applications. Known for its reliability and precision, the B13F combines advanced technology with practical features that make it a popular choice among woodworkers, metalworkers, and those involved in DIY projects.

One of the standout features of the Hitachi B13F is its powerful 350-watt motor, which provides sufficient torque for a wide range of drilling operations. This motor is designed to handle heavier materials, ensuring that users can work with wood, metal, and plastics without compromising on performance. Additionally, the drill press offers a variable speed control system, allowing users to select from a speed range of 580 to 3,050 RPM, making it suitable for drilling different materials with ease and precision.

The B13F's 13mm keyless chuck provides convenience and quick tool changes, reducing setup time and enhancing productivity. This feature allows users to effortlessly switch between drill bits without the need for additional tools, which is especially beneficial for those who require frequent bit changes on the job site or in their workshops.

Precision is a hallmark of the Hitachi B13F, thanks in part to its laser guide system that aids in aligning the drill bit with the target material. This ensures accurate and clean holes, minimizing the risk of error in drilling. The drill press is equipped with an adjustable depth stop, enabling users to set the maximum drilling depth for consistent results across multiple holes.

The construction of the B13F is another highlight, with a sturdy cast iron base that provides stability during operation. This solid foundation minimizes vibrations, contributing to a smoother drilling experience and enhancing the overall accuracy of the tool. The height-adjustable work table also adds flexibility, allowing users to accommodate various workpiece sizes effortlessly.

Moreover, safety features such as the emergency stop switch and a built-in work light further enhance the usability of the Hitachi B13F, ensuring that operators can work efficiently while prioritizing safety.

In summary, the Hitachi B13F benchtop drill press combines power, precision, and convenience in a compact design. With advanced technologies such as variable speed control, a keyless chuck, and laser guiding capabilities, it stands out as a reliable tool for a wide range of drilling tasks, making it an excellent investment for both professional workshops and home garages.
Top Page Image Contents