How to Install the Washing Machine

Connecting the power

Level Adjustment

■■Connect the washing machine to an alternating current via a correctly installed earthed socket only.

■■The mains voltage must correspond to the voltage specification on the washing machine.

■■Connection specifications as well as the required fuses are stipulated on the washing machine nameplate.

■■Do not plug the washing machine into an extension lead or power strip with multiple sockets.

■■All four adjustable feet must be firmly on the ground. The washing machine must not wobble.

■■Check the alignment of the washing machine with a spirit level, and adjust the feet if it’s not aligned.

Loosening

Lock nut

 

Elevating

Adjustable leg

Lock nut

Tightening

 

Plastic base plate

 

Loosen the lock nut by unscrewing in the arrow direction then stabilize the unit with the adjustable feet.

After adjustment, tighten the lock nut by screwing it in the arrow direction .

Tighten the lock nut until it reaches the plastic base plate.

Adjustable leg is not over 25 mm.

28

3WPL090501

Page 28
Image 28
Hitachi BD-W85TAE installation instructions Connecting the power Level Adjustment