28
29
3WPL090501

■Connect the washing machine to an alternating current via a correctly

installed earthed socket only.

■The mains voltage must correspond to the voltage specication on the

washing machine.

■Connection specications as well as the required fuses are stipulated

on the washing machine nameplate.

■Do not plug the washing machine into an extension lead or power strip

with multiple sockets.

■All four adjustable feet must be rmly on the ground. The washing

machine must not wobble.

■Check the alignment of the washing machine with a spirit level, and

adjust the feet if it’s not aligned.
Loosening
Adjustable leg
Elevating
Lock nut
Loosen the lock nut by
unscrewing in the arrow
direction then stabilize
the unit with the adjustable
feet.
Lock nut Tightening After adjustment, tighten
the lock nut by screwing it
in the arrow direction .
Plastic base plate
Tighten the lock nut until it
reaches the plastic base plate.
Adjustable leg is not over 25 mm.

■You need a space of 600 mm (W) x 600 mm (D) x 850 mm (H) with at

least 3 mm of clearance on the sides, above and back.

■If the height of the space ranges from 823 mm to 852 mm, use upper

plate (sold separately).
Upper Plate :
Part No. BD-W80MV 150
Please contact your local dealer when
installing the upper plate.
Necessary clearance :
(Sides) At least 3 mm
(Back) At least 3 mm
(Above) At least 3 mm

■For neater installation under the counter, check the height of internal

measurement before tting and adjust to the appropriate height with the
adjustable feet.
ÆPage 28 : How to Install the Washing Machine (Level Adjustment).
How to Install the Washing Machine
How to Install the Washing Machine
Under-counter
installation