English

REPLACING LIGHT BULB

WARNING:

Make absolutely sure that the battery is removed from the main body before replacing the light bulb.

Immediately after the light is turned OFF, the bulb retains high temperature. Make sure to cool down the light bulb thoroughly before replacing it so as to prevent burns.

CAUTION:

When replacing the light bulb, check the shape of base as well as the rating (24 V, 5 W), and then carry out perfect mount- ing. Otherwise, the light bulb can come off and/or cause overheat.

1. Detaching light bulb

(1)Remove the convex part of the light cover from the concave part of the housing, and then pull out the light cover in the arrow-marked direction as shown in Fig. 22.

(2)Push the back of the socket, and remove the socket and the light bulb together from the housing. (Fig. 23)

(3)Remove the light bulb from the socket. (Fig. 24)

2.Attaching light bulb

Take procedures here that are contrary to the detaching procedures.

NOTE:

When attaching the light bulb to the socket, insert the light bulb until it lightly bumps against the socket.

When attaching the socket to the housing, align the socket with the hole of housing while watching the back of the socket shown in Fig. 23, and insert the socket until it lightly bumps against the housing.

Light Cover

Convex

Concave Housing

Fig. 22 Side View

Back of the Socket

Housing

Fig. 23

Housing Socket Light Bulb Fig. 24 Top View

26

Page 26
Image 26
Hitachi C 7D instruction manual Replacing Light Bulb, Detaching light bulb, Attaching light bulb