English
CAUTION:
Be absolutely sure to insert the nail of the carbon brush into the contact portion outside the brush tube. (You can insert whichever one of the two nails provided.) Caution must be exercised since any error in this operation can result in the deformed nail of the carbon brush and may cause motor trouble at an early stage.
6.Adjusting the base and saw blade to maintain perpendicularity
The angle between the base and the saw blade has been adjusted to 90°, however should this perpendicularity be lost for
some reason, adjust in the following manner.
(1)Turn the base face up (Fig. 29) and loosen the wing bolt (A).
(2)Apply a square to the base and the saw blade and, turning the slotted set screw with a
7.Check for dust
Dust may be removed with a clean rag or a cloth dampened with soapy water. Do not use bleach, chlorine, gasoline or thinner, for they may damage the plas- tics.
8.Disposal of the exhausted battery
WARNING:
Do not dispose of the exhausted battery. The battery must explode if it is incinerated. The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of it’s useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal.
Nail of Carbon Brush
Protrusion
of Carbon
Brush
Fig. 27
Contact portion outside Brush Tube
Fig. 28
Square
Base
Slotted Set Screw
Fig. 29
28
