English
2. Adjusting the angle of inclination
WARNING: If the wing bolt (A) is loose, injury can result. Tighten it securely after adjustment.
As shown in Fig. 15 by loosening the wing bolt (A) on the inclined gauge, the saw blade may be inclined to a maximum angle of 45° in relation to the base. Always insure that the wing bolt (A) is thoroughly tightened after making the desired adjustment.
NOTE: Values of the inclined gauge pro- vided on the base merely serve as a rough guideline. For cutting operation at an inclined posture, use the circular saw after adjust- ing the angle between the base and the saw blade with a protrac- tor, etc.
Inch Scale
Metric Scale
Fig. 14
| Inclined |
Gauge | |
(A) |
|
3.Regulating the guide (Rip Fence)(Fig. 16)
................................. Optional Accessory
The cutting position can be regulated by moving the guide to the left or right after loosening its
Fig. 15
Wing Bolt, Lock spring | Base | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fig. 16 | Guide |
(Rip Fence) |
OPERATION
WARNING:
●Never touch the moving parts.
●Never operate the circular saw with the saw blade turned upward or to the side.
●Do not fix and secure the switch lock. Besides, keep your finger off the switch trigger when the circular saw is being carried around. Otherwise, the main body switch can be inadvertently turned ON, resulting in unexpected accidents.
●Keep the light ON during cutting operation only. If it is lit ON in other cases, the main body switch can be inadvertently turned ON, resulting in unexpected accidents.
22
