![](/images/new-backgrounds/1196147/19614771x1.webp)
ENGLISH
OTHER FEATURES
Automatic Store
■Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below.
Item | Display | Registration | Reproduction | |
condition | condition | |||
|
| |||
|
|
|
| |
Sound volume | VOLUME |
|
| |
Sound balance | BALANCE |
|
| |
Treble | TREBLE |
|
| |
Bass | BASS |
|
| |
Mute volume | MUTE LEVEL |
|
| |
Input status automatic | AUTO FREQ. | One set can be recorded. | During normal signal | |
display |
| reception. | ||
|
| |||
Line correction | LINE INTP. |
|
| |
3D COMB |
|
| ||
separation |
|
|
| |
HD signal | COMPONENT |
|
| |
Language selection | LANGUAGE |
|
| |
|
|
|
| |
|
| One set can be recorded |
| |
Contrast | CONTRAST | during common RGB1, |
| |
Brightness | BRIGHTNESS | RGB2 input; one set of | During normal signal | |
Color temperature | COLOR SELECT | two can be recorded | ||
reception. | ||||
Gamma correction | GAMMA | during normal signal | ||
| ||||
Input signal level | VIDEO LEVEL | reception with common |
| |
|
| VIDEO 1, VIDEO 2 input. |
| |
|
|
|
| |
Color | COLOR | One set can be recorded |
| |
Tint | TINT | During normal signal | ||
during common VIDEO 1, | ||||
Sharpness | SHARPNESS | reception. | ||
VIDEO 2 input. | ||||
Video enhance | VIDEO ENHANCE |
| ||
|
| |||
|
|
|
| |
Display area | DISPLAY AREA |
|
| |
Display size | DISPLAY SIZE |
|
| |
Horizonal position | H.POSITION | One group can be | During recording and when | |
Vertical position | V.POSITION | recorded for each signal | the same signal mode is | |
Dot clock frequency | CLOCK | mode. | detected. | |
Dot clock phase | PHASE |
|
| |
Verical size | V. SIZE |
|
| |
|
|
|
|
•The previously recorded items will be lost.
•The signal mode can be identified by the horizontal/vertical sync frequency and the sync signal polarity. Different signals with which all the elements are the same or similar will be handled as the same signal.
•RGB1 and RGB2 inputs have common elements that can be recorded for each signal mode. Because of this, when the contents are recorded with RGB1 (or RGB2), there may be loss of adjustment during RGB2 (or RGB1) reception in the same signal mode.
20