Hitachi CMP4121HDU Operating Instructions, Turning Power On and Off, On the monitor, Button on

OPERATING INSTRUCTIONS

Turning Power On and Off

■ To turn the monitor power ON, press the main power switch (					) on the monitor
main unit to ON, and then press the SUB POWER button or the							or	button on
the remote control.
■ To turn the monitor power OFF, press the SUB POWER button or the								or
button on the remote control, and then press the main power switch (							) on the
monitor main unit to OFF.
• During normal use, the main power switch (			) is set in the ON			position, and the monitor
	can then be turned ON/OFF using the SUB POWER button or the						button on the
	remote control.
	Indicating lamp	Power status						Operating
	Off		Off	When the main power switch					is set to
				OFF.
				When the main power switch (					) is ON,
	Lights red		Off	and the			button on the
				remote control or the SUB POWER button
		(standby)
				on the underside of the front of the frame
				is OFF.
	Lights or blinks			When the main power switch (					) is ON,
			On	and the			button on the remote control or
	green			the SUB POWER button on the underside
				of the front of the frame is ON.

ENGLISH

•When the indicating lamp blinks in green or the message “POWER SAVE” or “OUT OF FREQUENCY” appears on the screen, there is something unusual about the status of reception. See “Symptoms That Seemingly Appear to be

Failures.” 23

Main power switch

SUB POWER

Main unit	Remote
	controller

TIPS

•Avoid repeatedly turning the monitor on and off at short time intervals. Failures might result from such operation.

• Turn off the main power switch (	) before leaving the monitor out
of use for an extended period of time.

•If a power failure occurs while the main unit is running, it would be powered on upon recovery from the failure. Turn off the unit main power switch before leaving the main unit.

9