OPERATING INSTRUCTIONS (continued)
ENGLISH
Input Selection
■The input is switched by pressing the RGB1, RGB2, VIDEO1 or VIDEO2 button on the remote control. Pressing the INPUT SELECT button on the monitor main
unit switches the input in the order of
RGB1 → | RGB2 → VIDEO1 | → | Remote |
controller | |||
VIDEO2 | → RGB1. |
| VIDEO 1 VIDEO 2 RGB 1 RGB 2 |
|
|
• When the same signal is input to RGB1 and RGB2, the phase may in some cases shift slightly but this is not a malfunction. In such case, readjust the PHASE of the one being
used. | INPUT SELECT |
|
When using INPUT SELECT
RGB1 |
| ||
|
|
|
|
RGB2 | (BNC input) |
| |
|
|
|
|
VIDEO1 | ( composite or S input | ) | |
|
|
|
|
VIDEO2 | ( COMPONENT input | ) | |
Volume Adjustment
■ While the | ) is not on display,12 | press the remote |
| ||
controller VOLUME button | or | VOLUME+ | VOLUME- |
| ▲ or |
(or the main unit VOLUME button | |||||
▼ to adjust the sound volume.
|
|
|
| Remote | |
• The adjustment status will be displayed as |
| controller | |||
| VOLUME+ | ||||
guidance while you press these buttons. |
|
| |||
|
|
| |||
•While the guidance is on display, press |
| VOLUME+ | |||
| VOLUME- | ||||
or | ▲ to turn up the volume. |
|
|
| |
•While the guidance is on display, press |
| VOLUME- | |||
| Main unit | ||||
or | ▼ to turn down the volume. |
|
|
| |
• You can also adjust the sound volume setting |
| VOLUME | |||
via the | . | 14 | |||
| |||||
• The sound volume adjustment mode will exit
when no keys are entered for 5 seconds. (The adjustment status guidance will disappear automatically.)
Sound volume setting
VOLUME : 30
Adjustment status guidance
Sound Mute
■ Press the remote controller MUTE button to mute the sound temporarily.
•When you press the button, [MUTE] (pink) and the status of volume setting will be displayed in a guidance image.
• While the sound is muted, press the | button |
to turn down the volume. |
|
• While the sound is muted, press the | button |
to cancel the mute. |
|
• You can also adjust the sound volume setting of the
mute via the | . |
VOLUME-
VOLUME+
14
Sound volume setting
Remote controller
MUTE
MUTE | : 30 |
(The display will turn to pink.)
■Press the remote controller MUTE button once again and the mute will be canceled and the guidance will change to VOLUME (blue), enabling the volume to be heard.
•When MUTE is used, the guide display will continue for 5 sec. and then turn off.
10
