Contrast Adjustment
■ While the | , is not on display, press the remote | |
|
| 12 |
controller SELECT button | or | to adjust the contrast. |
•When you press these buttons, the status of contrast adjustment and the input horizontal
(H)and vertical (V) frequencies of the input signal will be displayed in a guidance image.
(For RGB input only)
•While the guidance is on display, press the
key to narrow the difference between darkness and brightness.
•While the guidance is on display, press the key to widen the difference between darkness and brightness.
•You can also adjust the contrast setting via the
. | 13 |
•The contrast adjustment mode will exit when no keys are entered for 5 seconds. (The adjustment status guidance will disappear automatically.)
VIDEO
Remote
controllerCONTRAST : 100
Contrast setting
RGB
| CONTRAST : 100 |
|
H : ** | . * kHz, V : ** | . * Hz |
Input horizontal | Input vertical |
frequency | frequency |
Adjustment status guidance
ENGLISH
Size Selection
■Each press on the SIZE button on the remote control switches the display size of the screen (or the display area) in the following order. The selected mode is
displayed in the lower part of the screen.
•RGB signal input |
|
| Remote | |
NORMAL | FULL |
| ZOOM | controller |
| SIZE | |||
|
|
|
| |
•VIDEO signal input |
| FULL | ||
|
| |||
4:3 | PANORAM. | MOVIE1 |
| |
| FULL | MOVIE2 |
| |
• Depending on the signal type, sometimes it may not be possible to change screen size. Sometimes certain sizes may be unavailable.
Input Signal Status Display
■Press the remote controller RECALL button to display the status of input signals on the screen.
■Press the remote controller RECALL button once again to exit the screen display.
•The Menu will clear 5 seconds later.
Remote controller
RECALL
VIDEO
VIDEO2 [COMPONENT]
Input terminal name
RGB
RGB1
H : 46.5kHz, V : 60.0Hz
Input horizontal | Input vertical |
|
frequency | frequency | 11 |
|
|
