Remote control
Changing the frequency of remote control signal
The accessory remote control has the two choices on signal frequency, Mode 1:NORMAL and Mode 2:HIGH. If the remote control does not function properly, attempt to change the signal frequency.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME UP
ON
In order to set the Mode, please keep pressing the
OFF
DOWN
(2)
combination of the two buttons listed below simultaneously for about 3 seconds.
(1)Set to Mode 1:NORMAL... the VOLUME - and the RESET buttons
(2)Set to Mode 2:HIGH... the MAGNIFY OFF and the ESC buttons
KEYSTONE | MY BUTTON | 2 | MUTE | (1) |
| 1 |
|
| |
POSITION |
|
| MENU |
|
| ENTER |
|
|
|
ESC |
|
| RESET |
|
Please remember that the REMOTE FREQ. in the SERVICE item of the OPTION menu of the projector to be controlled should be set to the same mode as the remote control.
ViewSonic | 13 | PJL9371 |
