SCREEN menu
Item
Description
| Each input port for this projector can have a name applied to it. | |
| (1) Use the ▲/▼ cursor buttons on the SCREEN menu to select the | |
| SOURCE NAME and press the ► cursor (or the ENTER) button. | |
| The SOURCE NAME menu will be displayed. | |
| (2) Use the ▲/▼ cursor buttons on the | |
| SOURCE NAME menu to select the port | |
| to be named and press the ► cursor | |
| button. Right side of the menu is blank | |
| until a name is specified. | |
| The SOURCE NAME dialog will be | |
| displayed. | |
| (3) The current name will be displayed | |
| on the first line. Use the ▲/▼/◄/► | |
| cursor buttons and the ENTER (or | |
| the INPUT)button to select and enter | |
| characters. To erase 1 character at one | |
| time, press the RESET (or press the | |
SOURCE NAME | ◄ cursor and the INPUT buttons at the | |
same time) button. Also if you move | ||
| ||
| the cursor to the DELETE or the ALL | |
| CLEAR on screen and press the ENTER | |
| (or the INPUT) button, 1 character or all | |
| characters will be erased. The name can | |
| be a maximum of 16 characters. | |
| (4) To change an already inserted character, press the ▲ cursor | |
| button to move the cursor to the first line, and use the ◄/► | |
| cursor buttons to move the cursor on the character to be | |
| changed. | |
| After pressing the ENTER (or the INPUT) button, the character | |
| is selected. Then, follow the same procedure as described at | |
| the item (3) above. | |
| (5) To finish entering text, move the cursor to the OK on screen | |
| and press the ► cursor (or the ENTER / the INPUT) button. To | |
| revert to the previous name without saving changes, move the | |
| cursor to the CANCEL on screen and press the ◄ cursor (or the | |
| ENTER / the INPUT) button. | |
| Using the ▲/▼ cursor buttons switches the mode for the template | |
| screen. | |
| Press the ► cursor (or the ENTER) button to display the selected | |
| template, and press the ◄ cursor button to close the displayed | |
TEMPLATE | screen. | |
| The last selected template is displayed when the MY BUTTON | |
| allocated to the TEMPLATE function is pressed. | |
| TEST PATTERN ó | |
|
(continued on next page)
ViewSonic | 40 | PJL9371 |
