INPUT menu
Item
Description
The resolution for the COMPUTER IN1 and the COMPUTER IN2 input signals can be set on this projector.
In the RESOLUTION menu select the resolution you wish to display using the ▲/▼ cursor buttons.
■AUTO
Selecting AUTO will set a resolution appropriate to the input signal.
■STANDARD
Pressing the ► cursor (or the ENTER) button when selecting a STANDARD resolution will automatically adjust the horizontal and vertical positions, clock phase and horizontal size.
The INPUT_INFORMATION dialog will be displayed.
■CUSTOM
STANDARD
↓
RESOLUTION
(1) To set a custom resolution use the ▲/▼ cursor buttons to select the CUSTOM and the RESOLUTION_CUSTOM box will be displayed.
Set the horizontal (HORZ) and vertical (VERT) resolutions using the ▲/▼/◄/► cursor buttons. This function is may not support all resolutions.
(2)Move the cursor to the OK on screen and press the ► cursor (or the ENTER) button. The message "ARE YOU SURE YOU WISH TO CHANGE RESOLUTION?" appears. To save the setting, press the ► cursor button.
The horizontal and vertical positions, clock phase and horizontal size will be automatically adjusted.
To revert back to the previous resolution without saving changes, move the cursor to the CANCEL on screen and press the
◄cursor (or the ENTER) button. The screen will then return to the RESOLUTION menu displaying the previous resolution.
• For some pictures, this function may not work well.
ViewSonic | 33 | PJL9371 |
