![SETUP menu](/images/new-backgrounds/102502/10250277x1.webp)
SETUP menu
SETUP menu
From the SETUP menu, items shown in the table below can be performed.
Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER) buttonn to execute the item. Then perform it according to the following table.
Item
Description
| Selecting this item performs the Automatic keystone distortion | ||
| correction. Projector automatically corrects vertical keystone | ||
| distortion due to the (forward/backward) setup angle by itself. | ||
| This function will be executed only once when selected in the menu. | ||
| When the slant of the projector is changed, execute this function | ||
| again. |
| |
| • The adjustable range of this function will vary among inputs. For | ||
| some input, this function may not work well. |
| |
| • When the V:INVERT or the H&V:INVERT is selected to the | ||
AUTO KEYSTONE | MIRROR item in the SETUP menu, if the projector screen is inclined | ||
(EXECUTE) | or angled downward, this function may not work correctly. |
| |
• When the zoom adjustment is set to the TELE (telephoto focus), | |||
| |||
| this function may be excessive. This function should be used when | ||
| the zoom adjustment is set to the full WIDE | ||
| whenever possible. |
| |
| • When the projector is placed on the level (about ±3°), this function | ||
| may not work. |
| |
| • When the projector is inclined to near ±30 degree or over, this | ||
| function may not work well. |
| |
| • This function will be unavailable when the Transition Detector is | ||
| on. |
| |
| Using the ◄/► cursor buttons corrects the vertical keystone distortion. | ||
| Shrink the bottom of the image ó Shrink the top of the image | ||
| • The adjustable range of this function will vary among inputs. For | ||
| some input, this function may not work well. |
| |
KEYSTONE | • When the zoom adjustment is set to the TELE (telephoto focus), | ||
| this function may be excessive. This function should be used when | ||
| the zoom adjustment is set to the full WIDE | ||
| whenever possible. |
| |
| • This function will be unavailable when the Transition Detector is | ||
| on. |
| |
| Using the ▲/▼ cursor buttons turns off/on the eco mode. |
| |
ECO MODE | NORMAL ó ECO |
| |
• When the ECO is selected, acoustic noise and screen brightness | |||
| |||
| are reduced. |
| |
(continued on next page) |
| ||
ViewSonic | 34 | PJL9371 |