Troubleshooting
Regarding the indicator lamps (continued)
POWER | TEMP | LAMP | SECURITY | Description | |
|
|
|
|
| |
|
|
|
| The cooling fan is not operating. | |
Blinking |
|
|
| Please turn the power off, and allow the projector | |
|
|
| to cool down at least 20 minutes. After the projector | ||
In Red | Blinking | Turned | Turned | has sufficiently cooled down, please make | |
or | In Red | off | off | confirmation that no foreign matter has become | |
Lighting | caught in the fan, etc., and then turn the power on | ||||
In Red |
|
|
| again. | |
|
|
|
| If the same indication is displayed after the remedy, | |
|
|
|
| please contact your dealer or service company. | |
|
|
|
| There is a possibility that the interior portion | |
|
|
|
| has become heated. | |
|
|
|
| Please turn the power off, and allow the projector | |
Blinking |
|
|
| to cool down at least 20 minutes. After the projector | |
|
|
| has sufficiently cooled down, please make | ||
In Red | Lighting | Turned | Turned | confirmation of the following items, and then turn | |
or | In Red | off | off | the power on again. | |
Lighting | • Is there blockage of the air passage aperture? | ||||
In Red |
|
|
| • Is the air filter dirty? | |
|
|
|
| • Does the peripheral temperature exceed 35°C? | |
|
|
|
| If the same indication is displayed after the remedy, | |
|
|
|
| please set FAN SPEED of SERVICE item in | |
|
|
|
| OPTION menu to HIGH. | |
|
|
|
| It is time to clean the air filter. | |
Lighting |
|
|
| Please immediately turn the power off, and clean | |
Simultaneous | Turned | or change the air filter referring to the section | |||
In | blinking in Red | off | “Cleaning and replacing the air filter”. After cleaning | ||
Green | or changing the air filter, please be sure to reset the | ||||
|
|
| |||
|
|
|
| filter timer. | |
|
|
|
| After the remedy, reset the power to ON. | |
Lighting |
|
|
| There is a possibility that the interior portion | |
Alternative | Turned | has become overcooled. | |||
In | blinking in Red | off | Please use the unit within the usage temperature | ||
Green | parameters (5°C to 35°C). | ||||
|
|
| |||
|
|
|
| After the treatment, reset the power to ON. | |
NOTE • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such a case, disconnect the power cord, and wait at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again.
ViewSonic | 60 | PJL9371 |
