ViewSonic pjl9371 manual INPUTmenu, Description, Progressive, Video Nr, Color Space, ViewSonic

INPUT menu

INPUT menu

From the INPUT menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER) button to execute the item. Then perform it according to the following table.

Item

Description

	Using the ▲/▼ cursor buttons switches the progress mode.
	TV ó FILM ó OFF
	• This function is performed only for a video signal, s-video signal or
PROGRESSIVE	component video signal of 480i@60 or 576i@50.
	• When the TV or the FILM is selected, the screen image will be
	sharp. The FILM adapts to the 2-3 Pull-Down conversion system.
	But these may cause a certain defect (for example, jagged line) of
	the picture for a quick moving object. In such a case, please select
	the OFF, even though the screen image may lose sharpness.

Using the ▲/▼ cursor buttons switches the noise reduction mode.

	HIGH ó MID ó LOW
VIDEO NR	• This function is performed only for a video signal, s-video signal or
	component video signal of 480i@60 or 576i@50.

•When this function is excessive, it may cause a certain degradation of the picture.

Using the ▲/▼ cursor buttons switches the mode for color space.

	AUTO ó RGB ó SMPTE240 ó REC709 ó REC601
COLOR SPACE	• This item can be selected only for a computer signal or a
	component video signal (except SCART RGB).

•The AUTO mode automatically selects the optimum mode.

•The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except the AUTO.

Using the ▲/▼ cursor buttons switches the function of the COMPONENT (Y, Cb/Pb, Cr/Pr) port.

COMPONENT ó SCART RGB

COMPONENT When the SCART RGB is selected, the COMPONENT (Y, Cb/Pb, Cr/Pr) and the VIDEO ports will function as a SCART RGB port. A SCART adapter or SCART cable is required for a SCART RGB input to the projector. For details, contact your dealer.

(continued on next page)

ViewSonic 31 PJL9371