ViewSonic pjl9371 manual Description, Mirror, Standby Mode, Monitor Out, ViewSonic

SETUP menu

Item

Description

	Using the ▲/▼ cursor buttons switches the mode for mirror status.
MIRROR
	NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT
	If the Transition Detector is on and the MIRROR status is changed,
	the TRANSITION DETECTOR ON alarm will be displayed when
	projector is restarted after the AC power is turned off.
	Using ▲/▼ cursor buttons switches the standby mode setting
	between the NORMAL and the SAVING.
	NORMAL ó SAVING
	When the SAVING is selected, the power consumption in the
STANDBY MODE	standby state is lowered with some functional restriction as below:
	• When the SAVING is selected, the RS-232C communication
	control is disabled except to turn the projector on while the projector
	is in the standby state.
	• When the SAVING is selected, the AUDIO OUT STANDBY setting
	of the AUDIO SOURCE is invalid, and no signal is output from the
	AUDIO OUT ports in the standby state.
	The combination of a picture shown on screen and output from the
	MONITOR OUT port can be arranged in the menu.
	The picture coming into the port selected in the (2) is output to the
	MONITOR OUT port while an image from the port chosen in the (1)
	is on screen.
	(1) Choose a picture input port using ▲/▼ cursor buttons.

	COMPUTER IN1 ó COMPUTER IN2
	
	STANDBY	COMPONENT
	
	VIDEO ó S-VIDEO ó (Y, Cb/Pb, Cr/Pr)
MONITOR OUT	• Choose the STANDBY, to select the
	output signal from the	MONITOR OUT port in the standby state.

(2)Select one of the COMPUTER IN ports using the ◄/► cursor buttons.

Choosing the COMPUTER IN1 allows the following choice. COMPUTER IN1 ó OFF

Choosing the COMPUTER IN2 allows the following choice. COMPUTER IN2 ó OFF

Choosing other input or the STANDBY allows the following choice. COMPUTER IN1 ó COMPUTER IN2 ó OFF

• The OFF disables the MONITOR OUT port.

ViewSonic 35 PJL9371