INPUT menu
Item | Description |
|
|
| The video format for the |
| (1) Use the ▲/▼ cursor buttons |
| to select the input port. |
| |
| (2) Using the ◄/► cursor |
| buttons switches the mode |
VIDEO FORMAT | for video format. |
AUTO ó NTSC ó PAL ó SECAM | |
| |
| • This item is performed only for a video signal from the VIDEO port |
| or the |
| • The AUTO mode automatically selects the optimum mode. |
| • The AUTO operation may not work well for some signals. If the |
| picture becomes unstable (e.g. an irregular picture, lack of color), |
| please select the mode according to the input signal. |
The computer input signal type for the COMPUTER IN1 and IN2 ports can be set.
(1)Use the ▲/▼ cursor buttons to select the COMPUTER IN port to be set. COMPUTER IN1 ó COMPUTER IN2
(2)Use the ◄/► cursor buttons to select the computer input signal type.
COMPUTER IN | AUTO ó SYNC ON G OFF |
• Selecting the AUTO mode allows
you to input a sync on G signal or component video from the port.
•In the AUTO mode, the picture may be distorted with certain input signals. In such a case, remove the signal connector so that no signal is received and select the SYNC ON G OFF, and then reconnect the signal.
•The COMPUTER IN1/2 port can support a component signal also.
| Set the frame lock function on/off for each port. |
| (1) Use the ▲/▼ cursor buttons to select the input ports. |
| COMPUTER IN1 ó COMPUTER IN2 |
| (2) Use the ◄/► cursor buttons to |
| turn the frame lock function on/off. |
FRAME LOCK | ON ó OFF |
| • This item can be performed only on a signal with a vertical |
| frequency of 50 to 60 Hz. |
| • When the ON is selected, moving pictures are displayed more |
| smoothly. |
| • This function may cause a certain degradation of the picture. In |
| such a case, please select the OFF. |
(continued on next page)
ViewSonic | 32 | PJL9371 |