IMAGE menu
IMAGE
menu
From the IMAGE menu, items shown in the table below can be performed.
Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER) button to execute the item. Then perform it according to the following table.
Item | Description |
| |
|
|
| |
| Using the ▲/▼ cursor buttons switches the mode for aspect ratio. | ||
| For a computer signal |
| |
| NORMAL ó 4:3 ó 16:9 ó 16:10 |
| |
ASPECT | For a video signal, | ||
4:3 ó 16:9 ó 14:9 |
| ||
|
| ||
| For no signal |
| |
| 4:3 (fixed) |
| |
| • The NORMAL mode keeps the original aspect ratio of the signal. | ||
| Using the ◄/► cursor buttons adjusts the | ||
| Small (It magnifies picture) ó Large (It reduces picture) | ||
OVER SCAN | • This item can be selected only for a video, | ||
video signal. |
| ||
|
| ||
| • When this adjustment is too large, certain degradation may appear | ||
| at the frame area of the picture. In such a case, please adjust small. | ||
| Using the ◄/► cursor buttons adjusts the vertical position. | ||
| Down ó Up |
| |
| • | ||
| screen. If this occurs, please reset the vertical position to the default | ||
V POSITION | setting. Pressing the RESET button on the remote control when the V | ||
POSITION is selected will reset the V POSITION to the default setting. | |||
| |||
| • When this function is performed on a video signal, | ||
| or component video signal, the range of this adjustment depends on | ||
| the OVER SCAN setting. It is not possible to adjust when the OVER | ||
| SCAN is set to 10. |
| |
| Using the ◄/► cursor buttons adjusts the horizontal position. | ||
| Left ó Right |
| |
| • | ||
| screen. If this occurs, please reset the horizontal position to the default | ||
H POSITION | setting. Pressing the RESET button on the remote control when the H | ||
POSITION is selected will reset the H POSITION to the default setting. | |||
| |||
| • When this function is performed on a video signal, | ||
| or component video signal, the range of this adjustment depends on | ||
| the OVER SCAN setting. It is not possible to adjust when the OVER | ||
| SCAN is set to 10. |
| |
(continued on next page) |
| ||
ViewSonic | 29 | PJL9371 | |
