SCREEN menu
SCREEN menu
From the SCREEN menu, items shown in the table below can be performed.
Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER) button to execute the item. Then perform it according to the following table.
Item
Description
| Using the ▲/▼/◄/► cursor buttons switches the OSD (On Screen |
| Display) language. |
LANGUAGE | ENGLISH, FRANÇAIS, DEUTSCH, ESPAÑOL... |
| (shown in the LANGUAGE dialog) |
| Press the ENTER (or the INPUT) button to save the language setting. |
| Using the ▲/▼/◄/► cursor buttons adjusts the menu position. |
MENU POSITION To quit the operation, press the MENU button on the remote control | |
| or keep no operation for about 10 seconds. |
| Using the ▲/▼ cursor buttons switches the mode for the blank screen. |
| The blank screen is a screen for the temporarily blanking feature. It |
| is displayed by pressing the BLANK button on the remote control. |
| MyScreen ó ORIGINAL ó BLUE ó WHITE ó BLACK |
BLANK | MyScreen : Screen can be registered by the MyScreen item. |
| ORIGINAL : Screen preset as the standard screen. |
| BLUE, WHITE, BLACK : Plain screens in each color. |
•To avoid remaining as an afterimage, the MyScreen or the ORIGINAL screen will change to the plain black screen after several minutes.
Using the ▲/▼ cursor buttons switches the mode for the
MyScreen ó ORIGINAL ó OFF
START UP | MyScreen : The screen can be registered by the MyScreen item. |
ORIGINAL : The screen preset as the standard screen. | |
| OFF : Plain black screen. |
| • To avoid remaining as an afterimage, the MyScreen or the |
| ORIGINAL screen will change to the BLANK screen after several |
| minutes. If also the BLANK screen is the MyScreen or the |
| ORIGINAL, the plain black screen is instead used. |
| • When the ON is selected to the MyScreen PASSWORD item in |
| the SECURITY menu, the START UP is fixed to the MyScreen. |
(continued on next page)
ViewSonic | 37 | PJL9371 |
