ViewSonic pjl9371 Enter the SECURITY menu, If you have forgotten your password, Description

SECURITY menu

SECURITY menu

This projector is equipped with security functions. From the SECURITY menu, items shown in the table below can be performed.

To use SECURITY menu: User registration is required before using the security functions.

Enter the SECURITY menu

1.Use the ▲/▼ cursor buttons on the SECURITY menu to select ENTER PASSWORD and press the ► cursor (or the ENTER) button. The ENTER PASSWORD box will be displayed.

2.Use the ▲/▼/◄/► cursor buttons to enter the registered password. The factory default password is 4401. This password can be changed. Move the cursor to the right side of the ENTER PASSWORD box and press the ► cursor (or the ENTER) button to display the SECURITY menu.

•It is strongly recommended the factory default password to be changed as soon as possible.

•If an incorrect password is input, the ENTER PASSWORD box will be displayed again. If incorrect password is input 3 times, the projector will turn off. Afterwards the projector will turn off every time an incorrect password is input.

3.Items shown in the table below can be performed.

If you have forgotten your password

(1)While the ENTER PASSWORD box is displayed, press and hold the RESET (or press the ◄ cursor and the INPUT buttons at the same time) button for about 3 seconds.

(2)The 10 digit Inquiring Code will be displayed. Contact your dealer with the 10 digit Inquiring Code. Your password will be sent after your user registration information is confirmed.

•If there is no key input for about 55 seconds while the Inquiring Code is displayed, the menu will close. If necessary, repeat the process from (1).

Item	Description
	(1) Use the ▲/▼ cursor buttons on the
	SECURITY menu to select SECURITY
	PASSWORD CHANGE and press the ►
	cursor (or the ENTER) button to display the
	ENTER NEW PASSWORD box.
	(2) Use the ▲/▼/◄/► cursor buttons to enter the new password.
	(3) Move the cursor to the right side of the
	ENTER NEW PASSWORD box and press the
SECURITY	► cursor (or the ENTER) button to display
	the NEW PASSWORD AGAIN box, enter the
PASSWORD
	same password again.
CHANGE
	(4) Move the cursor to the right side of the NEW
	PASSWORD AGAIN box and press the ►
	cursor (or the ENTER) button and the NOTE
	NEW PASSWORD box will be displayed for
	about 30 seconds, please make note of the
	password during this time.
	Pressing the ► cursor (or the ENTER) button will close the NOTE NEW
	PASSWORD box.
	• Please do not forget your password.
(continued on next page)
ViewSonic	47	PJL9371