ViewSonic pjl9371 Item, Description, Transition Detector, Turning off the TRANSITION DETECTOR

SECURITY menu

Item

Description

If this function is set to the ON when the vertical angle of the projector or the MIRROR setting at which the projector is turned on is different than the previously recorded, the TRANSITION DETECTOR ON alarm will be displayed and the projector will not display the input signal.

•To display the signal again, set this function to the OFF.

•After about 5 minutes of displaying the TRANSITION DETECTOR ON alarm, the lamp will turn off.

•Keystone adjustment feature has been prohibited as long as the Transition Detector function is on.

1 Turning on the TRANSITION DETECTOR 1-1 Use the ▲/▼ cursor buttons on the SECURITY menu to select the TRANSITION DETECTOR

and press the ► cursor (or the ENTER) button to display the TRANSITION DETECTOR on/off menu.

TRANSITION

DETECTOR

1-2 Use the ▲/▼ cursor buttons on the TRANSITION DETECTOR on/off menu to select the ON. Select the ON and the current angle and the MIRROR setting will

be recorded. The ENTER NEW PASSWORD box (small) will be displayed.

1-3 Use the ▲/▼/◄/► cursor buttons to enter a password. Move the cursor to the right side of the ENTER NEW PASSWORD box (small) and press the ► cursor (or the ENTER) button to display the NEW PASSWORD AGAIN box, enter the same password again.

ENTER NEW PASSWORD

box (small)

1-4 Move the cursor to the right side of the NEW PASSWORD AGAIN box and press the ► cursor (or the ENTER) button to display the NOTE NEW PASSWORD box for about 30 seconds, please make note of the password during this time.

Pressing the ► cursor (or the ENTER) button will return to the TRANSITION DETECTOR on/off menu.

•Please do not forget your TRANSITION DETECTOR password.

•This function will activate only when the projector is started after turning off the AC power.

•This feature may not function properly if the projector is not in a stable position when the ON is selected.

2 Turning off the TRANSITION DETECTOR

2-1 Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/off menu. 2-2 Select the OFF to display the ENTER

PASSWORD box (large). Enter the registered password and the screen will return to the TRANSITION DETECTOR on/off menu.

If an incorrect password is input, the menu will	ENTER PASSWORD box
close. If necessary, repeat the process from 2-1.	(large)

3 If you have forgotten your password

3-1 Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/off menu. 3-2 Select the OFF to display the ENTER PASSWORD box (large). The 10

digit Inquiring Code will be displayed inside the box.

3-3 Contact your dealer with the 10 digit Inquiring Code. Your password will be sent after your user registration information is confirmed.

(continued on next page)

ViewSonic 50 PJL9371