ViewSonic pjl9371 Searching an input signal, Selecting an aspect ratio, For a computer signal

Operating

Searching an input signal		SEARCH button
1.	Press the SEARCH button on the remote control.
	The projector will start to check its input ports as below in	VIDEO	COMPUTER DOC.CAMERA
	order to find any input signals.			MY SOURCE/
		ASPECT	AUTO	SEARCH	BLANK
	When an input is found, the projector will stop searching	MAGNIFY	FREEZE	PAGE	VOLUME
		ON		UP
	and display the image. If no signal is found, the projector will
		OFF		DOWN
	return to the state selected before the operation.
		KEYSTONE	MY BUTTON		MUTE
			1	2
	COMPUTER IN 1  COMPUTER IN 2	POSITION			MENU
	VIDEO  S-VIDEO  COMPONENT (Y, Cb/Pb, Cr/Pr)

● While the ON is selected for the AUTO SEARCH item in the OPTION menu, the projector will keep checking the ports in above order repeatedly till an input signal is detected.

Selecting an aspect ratio

1. Press the ASPECT button on the remote control.

Each time you press the button, the projector switches the mode for aspect ratio in turn.

For a computer signal

NORMAL  4:3  16:9  16:10

For a video signal, s-video signal or component video signal

4:3  16:9  14:9

For no signal

4:3 (fixed)

ASPECT button

MY SOURCE/

VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY	FREEZE	PAGE		VOLUME
ON		UP
OFF		DOWN
KEYSTONE	MY BUTTON		2	MUTE
	1
POSITION				MENU

●The ASPECT button does not work when no proper signal is inputted.

●The NORMAL mode keeps the original aspect ratio setting.

ViewSonic 17 PJL9371