OPTION menu
Item | Description | |
|
| |
| Using the ▲/▼ cursor buttons adjusts the time to count down to | |
| automatically turn the projector off. | |
| Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) | |
AUTO OFF | When the time is set to 0, the projector is not turned off automatically. | |
When the time is set to 1 to 99, and when the passed time with no- | ||
| signal or an unsuitable signal reaches at the set time, the projector | |
| lamp will be turned off. | |
| If one of the projector's buttons or the remote control buttons | |
| is pressed or one of the commands (except get commands) is | |
| transmitted to the CONTROL port during the corresponding time, | |
| projector will not be turned off. | |
| Please refer to the section the “Turning off the power”. | |
| The lamp time is the usage time of the lamp, counted after the last | |
| resetting. It is shown in the OPTION menu. | |
| Pressing the ► cursor (or the ENTER / the RESET) button displays | |
| a dialog. | |
LAMP TIME | To reset the lamp time, select the OK using the ► cursor button. | |
CANCEL OK | ||
| ||
| • Please reset the lamp time only when you have replaced the lamp, | |
| for a suitable indication about the lamp. | |
| • For the lamp replacement, see the section the “Replacing the | |
| lamp”. | |
| The filter time is the usage time of the air filter, counted after the last | |
| resetting. It is shown in the OPTION menu. | |
| Pressing the ► cursor (or the ENTER / the RESET) button displays | |
| a dialog. | |
FILTER TIME | To reset the filter time, select the OK using the ► cursor button. | |
CANCEL OK | ||
| ||
| • Please reset the filter time only when you have cleaned or replaced | |
| the air filter, for a suitable indication about the air filter. | |
| • For the air filter cleaning, see the section the “Cleaning and | |
| replacing the air filter”. | |
(continued on next page) | ||
ViewSonic | 43 | PJL9371 |
