Operation
Picture Size Using Video Signals
Select one of seven picture sizes manually.
While viewing videos or digital video discs, perform the following actions:
1.Press the SIZE button on the remote control.
2.To switch the screen sizes, press the SIZE button again within 3 seconds. The available sizes are NORMAL, FULL, DYNAMIC, ZOOM, 2.35:1, 14:9, and UNDERSCAN.
If a 720p, 1080i, or 1080p signal is displayed, the available sizes are FULL, 2.35:1, DYNAMIC, and UNDERSCAN.
If displaying an enhanced
NORMAL (4:3)
Images with a 4:3 (Normal) aspect ratio are displayed.
FULL
Horizontally expands anamorphic signals to display the correct linearity.
Normal (4:3) images are horizontally expanded to fill the entire screen.
DYNAMIC
Vertically and horizontally expands the picture but at different aspect ratios.
ZOOM
Vertically and horizontally expands the picture while maintaining the correct aspect ratio.
2.35:1
Image is expanded at a 2.35:1 ratio to fill the entire screen. The screen is filled vertically; however, some information will be lost on the left and right sides of the image.
Available for the following inputs:
Video, Component, or RGB input (480I, 480P, 576I, 576P, 720P, 1080I, 1080P)
To avoid image retention, use the 2.35:1 image size if black bars are displayed at the top and bottom of the screen showing the displayed image.
14:9
Image is displayed at a 14:9 aspect ratio.
Available for the following inputs:
Video, Component, or RGB input (480I, 480P, 576I, 576P)
UNDERSCAN
Standard televisions crop (Underscan) images. Utilize the UNDERSCAN function in the SCREEN menu to display the entire image.
NOTE: Depending on the type of component used, black borders or signal noise may appear near the screen edges while in UNDERSCAN mode.
Over a period of time, image ghosting, shadowing, or
NOTE: Do not display 4:3 content in NORMAL mode for extended periods of time to avoid image ghosting, shadowing, or
