Recommended Use
CAUTION
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN POSITIONING THE MONITOR:
•For optimum performance, allow 20 minutes for warm- up.
•Rest your eyes periodically by focusing on an object at least 5 feet away. Blink often.
•Position the monitor at a 90 degree angle to windows and other light sources to minimize glare and reflections.
•Clean the monitor surface with a
•Adjust the monitor’s brightness and contrast controls to enhance readability.
•Get regular eye checkups.
Ergonomics
To realize the maximum ergonomic benefits, we recommend the following:
•Use the preset Size and Position controls with standard signals.
•Use the preset Color Setting.
•Do not use primary color blue on a dark background, as it is difficult to see and may produce eye fatigue due to insufficient contrast.
•This equipment is not for use at video display work station according to Bildscharb V.
For more detailed information on setting up a healthy work environment, refer to the following document:
American National Standard for Human Factors Engineering of Visual Display Terminal Workstations
Cleaning the Panel
•When the panel becomes dusty or dirty, wipe gently with soft cloth.
•Do not rub the panel with coarse material.
•Do not apply pressure to the surface.
•Do not use OA cleaner. OA cleaner will cause deterioration or discolor the surface.
Cleaning the Cabinet
•Unplug the power supply.
•Gently wipe the cabinet with a soft cloth.
•To clean the cabinet, dampen the cloth with a neutral detergent and water, wipe the cabinet and follow with a dry cloth.
NOTE:Th e surface of the cabinet is composed of many types of plastic.
DO NOT clean with benzene thinner, alkaline detergent, alcoholic system detergent, glass cleaner, wax, polish cleaner, soap powder, or insecticide. Rubber or vinyl should not be in contact with
the cabinet for an extended period of time. These types of fluids and materials can cause the paint to deteriorate, crack or peel.
CLEANING THE VENT HOLES
•Clean plasma ventilation areas using a vacuum cleaner with a soft brush nozzle attachment.
•To ensure proper ventilation, cleaning the ventilation areas must be carried out monthly. More frequent cleaning may be necessary depending on the environment in which the plasma monitor is installed.
English
Published by:
The Human Factors and Ergonomics Society P.O. Box 1369, Santa Monica, California 90406.
