Part Names and Functions
Control Panel
9
EXIT | INPUT | MUTE |
ON OFF
| 10 | 8 | 7 | 6 |
|
| |||
1) | POWER |
|
|
|
| Switches the power on/standby. |
|
|
|
2) | MUTE |
|
|
|
| Switches the audio mute ON/OFF. |
|
|
|
3) | INPUT |
|
|
|
| Switches between input sources. |
|
|
|
| Acts as SET button within the OSD menu. |
|
|
4) PLUS (+)
Increases the setting adjustment within OSD menu.
5) MINUS
Decreases the setting adjustment within OSD menu.
6) UP ()
Increases the volume level when the OSD is off.
Moves area up to select which setting to is to be adjusted within OSD menu.
7) DOWN ()
Decreases the volume level when the OSD is off.
Moves down to select which setting is to be adjusted within OSD menu.
5 | 4 | 3 | 2 | 1 |
8) | EXIT |
|
|
|
Activates the OSD menu when the OSD menu is off. Exits from the current menu being displayed to the previous menu within the OSD.
9) Remote control sensor and Power indicator
Receives the signal when using the wireless remote control. Glows green when the monitor is active. Glows red when the monitor is in Standby mode. Glows Amber when the monitor is in POWER SAVE mode.
A red blinking Power indicator means that the monitor has detected a failure. Contact qualified personnel in case of failure.
10) Main Power Switch
Seesaw switch to turn the main power on/off.
Mode | Status indicator light |
|
|
Power On | Green |
Standby | Red |
Power save | Amber |
Diagnosis | Red blinking |
(Detecting failure) |
|
|
|
NOTE:
The POWER button does not completely turn off the display. Use the Main Power Switch to completely turn off the display.