Part Names and Functions - continued
REMOTE CONTROL ID
The remote control included with the display can be used to control up to 26 individual monitors using what is called the REMOTE CONTROL ID mode. The REMOTE CONTROL ID mode works in conjunction with the Monitor ID, allowing control of up to 26 individual monitors. For example: if there are many monitors being used in the same area, a remote control in normal mode would send signals to every monitor at the same time Figure 1. Using the remote in REMOTE CONTROL ID mode will only operate one specific monitor within the group Figure 2.
TO SET REMOTE CONTROL ID:
While holding down the REMOTE ID SET button on the remote control, use the KEYPAD to input the Monitor ID
When 0 is selected or when the remote control is in normal mode, all monitors will be operated.
TO USE REMOTE CONTROL ID MODE
ID Mode - To enter ID Mode press the REMOTE ID SET button and hold down for 2 seconds.
Normal Mode - To return to Normal Mode press the REMOTE ID RESET button and hold down for 2 seconds.
In order for this feature to work properly, the display must be assigned a Monitor ID number. The Monitor ID number can be assigned under the OPTION3 menu in the OSD (See page 17).
If monitor ID is set to “ALL” , monitor is controled by remote control not depend on remote ID.
Remote Control ID Function
Monitor ID:1 |
| Monitor ID:2 |
| Monitor ID:3 |
|
|
|
|
|
Remote works |
| Remote works |
| Remote works |
Figure 1 | 1 | 2 | 3 |
| 4 | 5 | 6 |
Remote in Normal | 7 | 8 | 9 |
| 0 |
| |
mode or the REMOTE |
|
| + |
|
|
| |
ID is set to 0 | + |
| + |
|
|
|
Monitor ID:1 |
| Monitor ID:2 |
| Monitor ID:3 |
|
|
|
|
|
Remote does |
| Remote does |
| Remote works |
not work |
| not work |
|
|
Figure 2 | 1 | 2 | 3 |
| 4 | 5 | 6 |
Remote set up to | 7 | 8 | 9 |
| 0 |
| |
use Remote ID:3 |
|
| + |
|
|
| |
| + |
| + |
