NEC 50XP10, 42XP10, 60XP10 user manual On-Screen Display OSD, English-16

On-Screen Display (OSD)

Main Menu	Sub Menu	Sub Menu2	Sub Menu3	Explanation	Default	Reset
SCREEN	ASPECT MODE			Selects aspect ratio of the displayed image. Press + or			English
				Display area of the PDP.
				- to select.
	V-POSITION			Controls the vertical position of the image within the	0	YES
				Press + to move up. Press - to move down.
	H-POSITION			Controls the horizontal position of the image within the	0	YES
				Display area of the PDP.
				Press + to move right. Press - to move left.
	V-HEIGHT			Adjusts the vertical size of the image.	0	YES
	H-WIDTH			Adjusts the horizontal size of the image.	0	YES
	AUTO PICTURE			ON: H-Position, V-Position, Clock and Clock Phase are	OFF	NO
				adjusted automatically.
				OFF: H-Position, V-Position, Clock and Clock Phase are
				adjusted manually.
				VGA and RGBHV input only.
	CLOCK PHASE			Adjusts the visual “noise” on the image.	0	YES
				VGA and RGBHV input only.
	CLOCK			Press + to expand the width of the image on the right of	0	YES
				the screen.
				Press - to narrow the width of the image on the left.
				VGA and RGBHV input only.
	UNDER SCAN			ON: UNDERSCAN is selectable in the ASPECT MODE	OFF	YES
	Available only when			menu.
	the Advanced OSD			OFF: UNDERSCAN item is not selectable in the ASPECT
	function is enabled.			MODE menu.
				Video signal input only.
OPTION1	OSD	DISPLAY OSD		ON: Information about inputs, screen size, etc. is shown.	ON	YES
				OFF: No information is shown.
		OSD		Change the position of the menu between 1 and 6. Press	1	YES
		POSITION		+ or - to adjust.
		OSD ORBITER		ON: The menu position intermittently shifts eight dots	OFF	YES
				while the OSD is being displayed.
				OFF: The menu position does not shift.
		OSD TRANSP.		Adjusts the transparency level of the OSD.	70%	YES
				Press + or - to adjust.
	BNC INPUT			Selects the input type when using 5BNC connectors.	RGB	YES
				RGB: For RGB input.
				COMP.: For Component input (3BNC connectors).
				SCART1: For SCART input (4BNC connectors).
				SCART2: For SCART input (3BNC connectors and VIDEO1
				input).
				SCART1, SCART2 available for Europe and World-Wide
				models only.
	D-SUB INPUT			Selects the input type when using a mini D-SUB	RGB	YES
				connector.
				RGB: For RGB input.
				SCART3: for SCART input.
				SCART3 available for Europe and World-Wide models
				only.
	RGB SELECT			If there is a problem with signal detection, this function	AUTO	YES
				forces the monitor to display the signal at the desired
				resolution.
				If no problem is detected, the only available option will be
				“AUTO”.
				VGA and RGBHV input only.
	HD SELECT			Manually selects signal output when similar 1080I signal	1080B	NO
				are detected.
				1080B: Standard digital broadcasts.
				1080A: Special digital broadcasts (ex. DTC100).
	INPUT SKIP			Skips to next input if present input signal is not detected.	OFF	YES
				This function is valid only for INPUT key on the display.
	ALL RESET			Resets settings back to factory default values.	OFF

English-16