Hitachi CP-A200 user manual Preparing for the remote control, Malfunctions

7. Preparing for the remote control

The accessory remote control needs batteries. Use the batteries included in this product or two new batteries of the specified type: HITACHI MAXELL, part number LR6 or R6P. Follow the following procedure.

1. Remove the battery cover in the back of the remote control.

2. Put the batteries into the battery holder, according to the polarity markings (+) and (-) inside the holder.

3. Put the battery cover back to the former state.

ENGLISH

Remote sensors

NOTE

‡7U\FKDQJLQJWKHEDWWHULHVZKHQWKHUHPRWHFRQWURO

malfunctions.

‡7KLVUHPRWHFRQWUROZRUNVZLWKWKHUHPRWHVHQVRUV on the projector using infrared light (Class 1 LED). The active sensor senses the remote control signal assigned within 60 degrees to right and left, and within 3 meters. For details, see the Operating Guide in the CD. ‡3UHYHQWWKHUHPRWHVHQVRUVIURPEHLQJKLWE\D

strong ray. It may cause malfunction of the projector and remote control.

30º 30º

3 m DSSUR[

WARNING Ŷ%HFDUHIXORIKDQGOLQJDEDWWHU\DVDEDWWHU\FDQFDXVHH[SORVLRQFUDFNLQJRUOHDNDJH which could result in a fire, an injury, and environment pollution. ‡8VHRQO\WKHVSHFLILHGDQGQHZEDWWHU\'RQRWXVHDEDWWHU\ZLWKGDPDJHVXFKDVD

VFUDWFKDGHQWUXVWRUOHDNDJH'RQRWPL[DQHZEDWWHU\ZLWKXVHGRQH

‡:KHQDEDWWHU\OHDNHGZLSHWKHOHDNDJHRXWZHOOZLWKDZDVWHFORWK,IWKHOHDNDJH

DGKHUHGWR\RXUERG\LPPHGLDWHO\ULQVHLWZHOOZLWKZDWHU:KHQDEDWWHU\OHDNHGLQ the battery holder, replace the batteries after wiping the leakage out. ‡0DNHVXUHWKHSOXVDQGPLQXVWHUPLQDOVDUHFRUUHFWO\DOLJQHGZKHQORDGLQJDEDWWHU\ ‡'RQRWZRUNRQDEDWWHU\IRUH[DPSOHUHFKDUJLQJRUVROGHULQJ ‡'RQRWNHHSWKHEDWWHULHVSXWLQWRWKHUHPRWHFRQWUROZKHQWKHUHPRWHFRQWUROLVQRW

XVHGIRUDORQJZKLOH.HHSDEDWWHU\LQDGDUNFRRODQGGU\SODFH1HYHUH[SRVHD battery to a fire or water.

‡2EH\WKHORFDOODZVRQGLVSRVLQJDEDWWHU\

7