Hitachi CP-A200 user manual Turning the projector off, STANDBY/ON button

11. Turning the projector off

Turn the projector off after turning off the other connected devices, unless mentioned in the manuals. For this projector, follow the procedure below.

1. Press the STANDBY/ON button (on the projector or remote control).

The “Power off?” dialog appears on the screen for about 5 seconds.

2. Confirm that there is nothing that the lens door hits while closing.

Then press the STANDBY/ON button again while the message appears.

The projection lamp goes off, the lens door closes, and the POWER indicator begins to blink orange.

NOTE

‡)RUFRROLQJWKHSURMHFWRUGRZQZDLWIRUWKH POWER indicator to stop blinking and turn steady orange.

The projector can be turned off without waiting IRUFRROLQJGRZQ+RZHYHUWKHPDQXIDFWXUH recommends cooling the projector down enough.

Do not turn the projector on for about 10 minutes or more after turning it off to prevent shortening its life.

POWER indicator

STANDBY/ON button

LAMP

TEMP

POWER

STANDBY/ON

INPUT

Power switch

STANDBY/ON button

ENGLISH

3. Press the side marked “ O ” of the power switch, as the power-off position. The POWER indicator goes off.

:KHQ\RXZLOOQRWXVHWKHSURMHFWRUIRUDORQJZKLOHXQSOXJDQGVHSDUDWHWKHSRZHUFRUG from the power outlet, for safety purposes.

NOTE

‡7KLVSURMHFWRUKDVWKHAUTO POWER OFF function. For details, see the Operating Guide in the CD.

CAUTION Ŷ%HFDUHIXOQRWWRSLQFK\RXUILQJHUZLWKWKHOHQVGRRUWRSUHYHQWDQLQMXU\ Ŷ'RQRWWRXFKWKHODPSFRYHURUDSSURDFKWKHH[KDXVWYHQWVZKLOHXVLQJWKHSURMHFWRU and for a while after use, to prevent a burn.

11