Hitachi CP-A200 user manual Starting the projector, STANDBY/ON button

8. Starting the projector

Turn on the projector and the connected devices. Turn on the projector ahead of other connected devices, unless mentioned in the manuals.

For this projector, follow the procedure below.

1. Press the side marked “ I ” of the power switch,	POWER indicator
	STANDBY/ON button
as the power-on position.
The POWER indicator lights up in orange.

NOTE

‡)RUDFRXSOHRIVHFRQGVDIWHUWKHSRZHU indicator lights up, wait to use the control buttons (on the projector and remote control). The buttons may not work soon.

2. Confirm that there is nothing that the lens door hits while opening.

Then, press the STANDBY/ON button (on the projector or remote control).

The lens door opens, the projection lamp lights up, and the POWER indicator begins to blink green.

:KHQWKHSURMHFWRUVWDUWVFRPSOHWHO\WKHLQGLFDWRUZLOO turn steady green.

NOTE

LAMP

TEMP

POWER

STANDBY/ON

INPUT

Power switch

STANDBY/ON button

‡7KLVSURMHFWRUKDVWKHDIRECT POWER ON function. For details, see the Operating

Guide in the CD. ‡,QVWDOOWKHSURMHFWRULQWKHZD\VSHFLILHGLQWKLVPDQXDO2WKHUZLVHWKHSURMHFWLRQODPS

may not light.

WARNING Ŷ1HYHUORRNLQWRWKHSURMHFWLRQOHQVRUPLUURUZKLOHWKHSURMHFWLRQODPSOLJKWVVLQFHWKH projection lamp ray may cause a trouble on your eyes.

CAUTION

Ŷ%HFDUHIXOQRWWRSLQFK\RXUILQJHUZLWKWKHOHQVGRRUDVLWPD\FDXVHDQLQMXU\

8