Hitachi CP-A200 user manual Caring for the mirror and lens

14. Caring for the mirror and lens

If the projection mirror or lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the mirror and lens, being cautious of handling.

1. Turn the projector off and unplug the power cord from the power outlet. And cool the projector down by leaving it for a while as it is.

2. The lens door can be opened manually. Please hold both side of the lens door and slowly open it until it is locked with clicking sound.

3. :LSHVRIWO\WKHPLUURUDQGOHQVZLWKDFOHDQLQJ cloth for lens on the market, being careful not to give any damage on the mirror and lens. For around edge of the mirror and lens where might be difficult to be wiped out, please use an air blower for cameras on the market to clean up.

4. To close the lens door properly, please take the
following procedure.
(1)	Plug in the projector.
(2) Turn on the power switch.		Cleaning cloth
	Even though the lens door starts to close, it
	might not be closed properly.
(3) Press the STANDBY/ON button, so that the
	lamp starts to light up.
(4) After the POWER indicator turns to steady
	green, press the STANDBY/ON button
	twice to turn off the projector.
	The lens door will close properly.	%ORZHU

NOTE ‡:KHQWKHOHQVGRRULVFORVHGPDQXDOO\LWPD\QRWVKXWSURSHUO\ ‡7KHOHQVGRRUPD\QRWFORVHZKHQWKHLENS DOOR LOCK function of the

SERVICE item in the OPTION menu is set to ON. For more information, please see the “Operating Guide” on the CD.

WARNING Ŷ%HIRUHFDULQJIRUWKHSURMHFWLRQPLUURUDQGOHQVWXUQWKHSURMHFWRURIIDQGXQSOXJWKH power cord, then cool the projector sufficiently. Ŷ'RQRWXVHDYDFXXPFOHDQHUWRFOHDQWKHSURMHFWLRQPLUURURUOHQVVLQFHLWPLJKWJLYH some damage. Ŷ'RQRWXVHFOHDQHUVRUFKHPLFDOVRWKHUWKDQWKRVHVSHFLILHGLQWKLVPDQXDO(VSHFLDOO\ the mirror has to be paid special attention, since these materials might give serious damage on the mirror.

CAUTION

Ŷ%HFDUHIXOQRWWRSLQFK\RXUILQJHUZLWKWKHOHQVGRRUWRSUHYHQWDQLQMXU\

ENGLISH

15