Hitachi CP-A200 user manual 0DLQWDLQLQJWKHDLUÀOWHU

0DLQWDLQLQJWKHDLUÀOWHU

3OHDVHFKHFNDQGFOHDQWKHDLUILOWHUSHULRGLFDOO\IRUNHHSLQJQRUPDOYHQWLODWLRQ:KHQ the indicators or a message prompts you to clean the air-filter, comply with it as soon as possible.

:KHQLWLVGDPDJHGRUWRRVRLOHGUHSODFHWKHILOWHUXQLW7RSUHSDUHWKHQHZILOWHUXQLWFDOO your dealer and tell the type number: UX35381

1.	Turn the projector off and unplug the power
	cord from the power outlet. And cool the
	projector down by leaving it for a while as it is.
2.	Use the vacuum cleaner on and around the filter
	unit.
3.	Slide the filter unit upward to take it off from
	the projector.
4.	Use the vacuum cleaner on the intake vents of
	the projector.
5.	Use the vacuum cleaner on the cover side of the
	filter unit. Do not vacuum the air-filter directly,
	since the cleaner may inhale the air-filter.
	:KHQWKHDLUILOWHULVGDPDJHGRUWRRVRLOHG
	prepare the new filter unit.
6.	0DNHVXUHWKDWWKHUHLVWKHDLUILOWHULQVLGHWKHQ
	slide the filter unit into place.
7.	Plug in and restart the projector. ( 

Filter unit

Intake vents

Then, reset the filter time (which is the time counter for the air-filter use). 3UHVVWKHŸRUźEXWWRQRQWKHSURMHFWRURUWKHMENU button on the remote

control. The “EASY MENU” appears.

(2)Point at the “FILTER TIME´LQWKHPHQXXVLQJWKHŸRUźEXWWRQWKHQSUHVV WKHŹEXWWRQ$GLDORJDSSHDUV

3UHVVWKHŸEXWWRQWRVHOHFWWKH³RESET” on the dialog. It performs resetting

the filter time.

NOTE

‡$ILOWHUXQLWRIVSHFLILHGW\SHZLOOFRPHZLWKWKHUHSODFHPHQWODPSIRUWKLVSURMHFWRU Replacing the filter unit at the same time with the lamp is recommended. ‡3OHDVHUHVHWWKHILOWHUWLPHRQO\ZKHQ\RXKDYHFOHDQHGWKHDLUILOWHUIRUDVXLWDEOH

indication about the air-filter.

WARNING Ŷ%HIRUHFDULQJIRUWKHDLUILOWHUWXUQWKHSURMHFWRURIIDQGXQSOXJWKHSRZHUFRUGWKHQ cool the projector sufficiently.

ŶUse only the filter unit of the specified type. Do not use the projector with the air-filter removed.

14