Hitachi CP-S225W user manual Power on, Power OFF

Models: CP-S225W

1 205
Download 205 pages 47.18 Kb
Page 9
Image 9

OPERATIONS

STANDBY/ON Button

POWER Indicator

STANDBY/

ON Button

Zoom knob

Focus ring

Power Switch

Slide Lens door

 

STANDBY/ON

VIDEO RGB

KEYSTONE

MENU

SELECT

MENU POSITION RESET

MAGNIFY

FREEZE VOLUME

 

 

Power ON

1.Check that the power cord is connected correctly.

2.Set the power switch to [ ]. The standby mode is selected, and the POWER indicator is turned to orange.

3.Press the STANDBY/ON button on the control panel or the remote controller. Warm-up begins and the POWER indicator blinks in green.

4.The POWER indicator ceases blinking and turns to green when power is on. Open the slide lens door.

5.Adjust picture size using the Zoom knob.

6.Adjust focus using the Focus ring.

Power OFF

1.Press the STANDBY/ON button on the control panel or the remote controller. Then, the message "Power off?" will appear on the screen,and the message will disappear by any operation or no operation for 5 seconds.During this messsage indication,press the STANDBY/ON button again. The projector lamp is extinguished and lamp cooling begins. The POWER indicator blinks orange during lamp cooling. Pressing the STANDBY/ON button has no effect while the POWER indicator is blinking.

2.The system assumes the Standby mode when cooling is complete, and the POWER indicator ceases blinking and changes to orange. Check that the indicator is orange and set the Power switch to [O].

3.The POWER indicator is extinguished when power is off. Do not forget to close the lens door.

WARNING • Please read this manual, and the separate “SAFETY INSTRUCTIONS” thoroughly before using the equipment. Always ensure that

the equipment is used safely.

NOTE • Except in emergencies, do not turn off unless the POWER indicator is orange as it will reduce the life of the projector lamp.

To prevent any troble, turn on/off the projector when the computer or video tape recorder is OFF. Providing a RS-232C cable is connected, turn on the computer before the projector.

When a projector continues projecting the same image, the image may remain as an afterimage. Please do not project the image same for a long time.

ENGLISH-8

Page 9
Image 9
Hitachi CP-S225W user manual Power on, Power OFF

CP-S225W specifications

The Hitachi CP-X275W and CP-S225W are advanced projectors designed to meet the varied needs of educational institutions, corporate environments, and home theaters. Both models boast impressive features and cutting-edge technologies that enhance user experience and image quality.

The CP-X275W projector is particularly noteworthy for its WXGA resolution of 1280 x 800 pixels, which enables a clear and vibrant display suitable for detailed presentations and graphics. It has a brightness level of 3,200 ANSI lumens, ensuring that images remain sharp and visible even in well-lit rooms. The contrast ratio of 2,000:1 further enhances image clarity, providing deeper blacks and more vibrant colors.

One of the most significant features of the CP-X275W is its advanced lens shift and keystone correction capabilities. These technologies allow users to adjust the image projection without distorting the picture, making installation more flexible. Moreover, the projector supports various input options, including HDMI, VGA, and USB, providing versatility for different devices and technologies.

On the other hand, the CP-S225W is tailored for more budget-conscious users while still delivering impressive performance. With a resolution of XGA at 1024 x 768 pixels and a brightness of 2,600 ANSI lumens, this model is well-equipped for classroom settings or small conference rooms. The 1,600:1 contrast ratio ensures that presentations remain clear, with defined image quality that captures audience attention.

Both projectors incorporate Hitachi’s proprietary technologies for enhanced performance. The lamps are designed with long operational life, up to 5,000 hours in eco mode, reducing maintenance costs and downtime. Additionally, they feature Hitachi’s Image Care technology, which maintains optimal image quality and energy efficiency, adjusting brightness based on the content being displayed.

Another highlight of both models is their portability, with a compact design and a weight that enables easy transport. They also include built-in speakers, eliminating the need for external audio equipment in many scenarios.

In summary, the Hitachi CP-X275W and CP-S225W projectors stand out for their robust features, image quality, and user-friendly technologies. While the CP-X275W is suited for high-demand environments requiring superior clarity and detail, the CP-S225W provides an excellent value proposition for everyday use. Both projectors cater to diverse audience needs, making them excellent choices for various applications.