English
Outer diameter
11.0mm
12.3mm
14.3mm
14.5mm
17.5mm
Taper mode | Applicable drill bit |
| |
|
|
|
|
|
|
| 11.0 mm |
Morse taper | Drill bit |
| 12.3 mm |
| 14.3 mm | ||
(No. 1) | (taper shank) |
| |
| 14.5 mm | ||
|
|
| |
|
|
| 17.5 mm |
|
|
| |
Taper shank adapter formed | |||
| |||
| |||
sory, but the drill bit for it is not provided. | |||
|
|
|
|
2. Anchor setting (rotation + striking)
◯Anchor setting adapter (for electric hammer drill)
Anchor setting adapter (for electric hammer drill)
Anchor size: W1/4”, W5/16”, W3/8”
◯Anchor setting adapter (for manual hammer)
Anchor setting adapter (for manual hammer)
Anchor size: W1/4”, W5/16”, W3/8”, W1/2”
3. Drilling holes in steel or wood (rotation only)
◯Drill chuck and chuck adapter (Also available for the model exclusively intended for the SDS bit.)
13 mm drill chuck (including chuck wrench)
Optional accessories are subject to change without notice.
APPLICATIONS
Rotation and striking function:
◯Drilling anchor holes
◯Drilling holes in concrete
◯Drilling holes in tile Rotation only function:
◯Drilling in steel or wood (with optional accessories)
PRIOR TO OPERATION
1.Power source
Ensure that the power source to be utilized conforms to the power requirements specified on the product nameplate.
2.Power switch
Ensure that the power switch is in the OFF position. If the plug is connected to a receptacle while the power switch is in the ON position, the power tool will start operating immediately, which could cause a serious accident.
6
