Panasonic DMC-TZ35 operating instructions 157, Edges of pictures are cut off when printing

Models: DMC-TZ35

1 163
Download 163 pages 21.54 Kb
Page 157
Image 157

Others

Q&A Troubleshooting

TV, computer, printer (continued)

Cannot communicate with the computer. ●●Not connected correctly. (→139)

●●Check whether computer has recognised camera. ●●Set [USB Mode] to [PC]. (→50)

●●Turn the camera off and then on again.

Computer does not recognise card (only reads built-in memory). ●●Disconnect USB connection cable and reconnect with card in place.

Computer does not recognise card. (When using an SDXC Memory Cards)

Check whether your computer is compatible with SDXC Memory Cards. http://panasonic.net/avc/sdcard/information/SDXC.html

A message prompting you to format the card may appear when you connect it. Do not format the card.

If the [Access] indicator on the LCD monitor does not go off, turn the camera off before disconnecting the USB connection cable.

Cannot print when connecting to printer. ●●Printer not compatible with PictBridge. ●●Set [USB Mode] to [PictBridge(PTP)]. (→50)

The edges of pictures are cut off when printing.

●●Release any trimming or edgeless printing settings on printer before printing. (Consult printer operating manual.)

●●The pictures were recorded in aspect ratio.

→ If printing in shop, check if 16:9 sizes can be printed.

Cannot print panorama pictures properly.

●●The aspect ratio of panorama pictures is different from that of regular still pictures, and some panorama pictures may not be printed correctly.

Use a printer with support for panorama pictures. (Refer to the instruction manual for the printer.)

We recommend adjusting the size of a picture in accordance with print paper using the “PHOTOfunSTUDIO” software on the CD-ROM (supplied).

- 157 -

VQT4P34

Page 157
Image 157
Panasonic DMC-TZ35 157, Edges of pictures are cut off when printing, Cannot print panorama pictures properly