Application (Record)
Using the [Rec] menu
••For the setting procedures of the menu. (→42)
[Stabilizer]
Automatically detects and prevents jitter.
When recording motion pictures, [Active Mode] (stabiliser for motion pictures) will automatically function. This decreases the jitter of the image when recording motion pictures while walking, etc.
■■Settings: [ON] / [OFF]
●●The setting is fixed to [ON] either during motion picture recording or in [Handheld Night Shot] Scene Mode.
●●The setting is fixed to [OFF] in the following Scene Modes: ••[Starry Sky] [3D Photo Mode]
●●Cases where Optical Image Stabiliser may be ineffective: ••When there is a lot of jitter
••When the zoom magnification is high (also in the Digital Zoom range) ••When taking pictures while following a moving subject
••When the shutter speed becomes slower to take pictures indoors or in dark places ●●In [Active Mode], stronger effect of the correction can be achieved at the wide end. ●●In the following case, [Active Mode] will not function even when recording motion
pictures.
••When [Rec Quality] is set to [VGA/25p] in [MP4]
[Date Stamp]
Still pictures can be taken with the recording date and time stamped on the still picture.
■■Settings: [W/O TIME] / [WITH TIME] / [OFF]
●●Date stamps on still pictures cannot be erased.
●●The date cannot be stamped when [Auto Bracket] or [Burst] is set, when recording a motion picture, or when the [3D Photo Mode] Scene Mode is set.
●●Do not request date printing in store or make date printing on printer for still pictures with date stamps. (Date printing may be overlapped.)
●●Cannot change the setting in [Intelligent Auto] Mode. The setting in other Recording Mode is applied.
[Clock Set]
Set the clock. Same function as that in [Setup] menu.
For details (→19).
- 106 - | VQT4P34 |
