![](/images/new-backgrounds/1218447/21844793x1.webp)
Basics
Using the [Setup] menu
••For the setting procedures of the menu. (→42)
[Monitor Luminance]
Make LCD monitor easier to see.
■■Settings
[Auto Power Monitor]:
The brightness is adjusted automatically depending on how bright it is around the camera.
[Power Monitor]:
Makes screen brighter than normal (for outdoor use). [High Angle]:
Makes the LCD monitor screen easier to see when the camera is held above eye level.
[OFF]
●●Cannot select [Auto Power Monitor] and [High Angle] in playback mode.
●●[Power Monitor] returns to ordinary brightness if there is no operation for 30 seconds when recording. (Press any button to make the screen brighter again.)
●●[High Angle] will be cancelled if the camera is turned off.
●●Because the picture shown on the LCD monitor screen emphasises brightness, some subjects may look different than their actual appearance, but this will not affect the recorded picture.
●●Setting [Monitor Luminance] reduces the operating time.
[Guide Line]
Select recording information display and types of guidelines.
■■Settings [Rec. Info.]
[ON] (Display recording information with guidelines.)
[OFF]
[Pattern]
/
: Change the patterns of guidelines.
●●When [Intelligent Auto] Mode has been selected, only is displayed. Also, recording information and guidelines cannot be displayed simultaneously.
●●Cannot be used in the following case: ••[Panorama Shot] Mode
- 47 - | VQT4P34 |