Application (Record)
Using the [Rec] menu
••For the setting procedures of the menu. (→42)
[Quality]
■■Settings: 
([Fine]): High quality, priority to picture quality
([Standard]): Standard quality, priority to the number of pictures
●●The setting is fixed to 
, in [High Sens.] Scene Mode.
●●The displayed icons are different in the [3D Photo Mode] Scene Mode: ([3D+Fine]): An MPO picture and a high quality JPEG picture are recorded
simultaneously.
([3D+Standard]): An MPO picture and a standard quality JPEG picture are recorded simultaneously.
[Sensitivity]
Set ISO Sensitivity (sensitivity to lighting) manually.
We recommend higher settings to take clear pictures in darker locations.
■■Settings: [AUTO] / 
[i.ISO] / [100] / [200] / [400] / [800] / [1600] / [3200]
Setting guide
[Sensitivity] | [100] |
| [3200] |
| |||
Location | Bright |
| Dark |
(recommended) | (outdoors) |
| |
|
| ||
Shutter speed | Slow |
| Fast |
Interference | Low |
| High |
Subject blur | High |
| Low |
●●[AUTO] is automatically set in a range up to 1600 based on subject brightness.
●● [i.ISO] is automatically set in a range up to 1600 based on subject movement and brightness.
●●The [Sensitivity] is automatically set in the following cases: ••When recording motion pictures
••When [Burst] is set to 
or
●●The shutter speed is restricted as follows based on the [Sensitivity] setting.
[Sensitivity] | Shutter speed |
[AUTO] / | Automatically changes depending on the [Sensitivity] setting. |
100/200/400 | 4 - 1/2000th |
800/1600 | 1 - 1/2000th |
3200 | 1/4 - 1/2000th |
●●Cannot select 
[i.ISO] in
●●Cannot select [AUTO] or 
[i.ISO] in [Manual Exposure] Mode.
- 97 - | VQT4P34 |
