Press the Prog / or number, To pause recording

If an unused DVD-RW disc is used, whether to initialize or not will be asked first. Make your selection, then press OK. (See page 36)

Uninitialized Disc

Do you want to initialize this disc?

Yes No

3	Press the PROG ( / ) or number
	(	) buttons to select the current

program you want to record.

4 Press the REC MODE button repeatedly, (or Press the REC MODE button and then press the 34 buttons) to select the recording speed (quality).

A. SP > LP > EP > XP B a===========b

Record Mode SP

Information concerning the channel is displayed on the screen and then recording begins.

Recording : PR 1 [Mono]

To view the current status of the disc and progress of recording: Press the INFO. button, and the information about the disc will appear.

Press the INFO. button once again.

Then you can check the information about the title under recording.

Press the REC PAUSE button to pause a recording in progress.

•Press the REC PAUSE button again to resume recording.

•You can switch channels by pressing the PROG ( / ) buttons while recording pauses.

Press the STOP ( ) button to stop or finish a recording in progress.

•When using DVD-RAM/DVD-RW/DVD-R discs, the message ‘Updating the information of disc. Please wait for a moment’ is displayed.

	■ You cannot change the recording mode and the
	PROG while recording.
NOTE	PROG while recording.

■Recording will stop automatically if there is no free space left for recording.

■Up to 99 titles can be recorded onto a disc.

■Recording will stop automatically if a copy pro- tected image is selected.

■DVD-RAM/DVD-RW discs must be formatted before starting to record.

Most new discs are sold unformatted.

■Do not use DVD-R authoring discs with this unit.