CM Skip Time Setting

5 Move the selection bar to “Manual Setup”, then press OK to select.

DVD-RAM(VR)

Install

Auto Setup

Manual Setup

MOVE	OK	RETURN	EXIT

6 Press the 34 buttons to select a PR (program) you wish to edit, delete, or swap. And then press OK button.

7 Select Edit, Delete, or Swap.

DVD-RAM(VR)			Manual Setup
PR	CH	Name	Decoder	Edit
01	---	----	--
01	---	----	--	Edit
02	---	----	--	Delete
03	---	----	--	Swap
04	---	----	--
05	---	----	--
06	---	----	--
07	---	----	--
	MOVE	OK	RETURN	EXIT

• In case of Edit : you can add or edit PR (program)

Manual Setup

PR	01

CH	- - -

Name	- - - -
Decoder
Decoder		Off
MFT

		Done
MOVE		OK

-CH: Tune the channel using 21 buttons or number buttons.

-Name: Display station name automatically detected in broadcasting signal. If not detected, you can edit name by using 3421 buttons.

-Decoder: If you set on, you can record scrambled channels using external decoder box. Before setting on, refer to connecting external decoder box in the page 16.

-MFT: You can tune up the channel frequency better using 21 button.

•In case of Delete: the channel information of selected PR (program) will be removed.

•In case of Swap: you can swap the channel information of two PR (programs). For example, if you wish to swap PR2 and PR5, select swap at PR2, then press OK button or 1 button at PR5.

When a program recorded on a DVD-RAM, a DVD-RW, or a DVD-R is played, the unit can be set to automatically skip a portion of the program corresponding to a CM (commercial) Skip Time set by the user.

The program can then be played from a point after the CM Skip Time. If the CM Skip button is pressed while a DVD disc is played, an instant skip function is performed for the set CM Skip Time.

1 With the unit in stop mode, press the MENU button on the remote control.

2 Select Setup using the 34 buttons, then press the 1 or OK button.

You can't use the Setup functions while playing a disc.

DVD-RAM(VR)

Setup

System

Language

Audio

Video

Parental Control