Digital Output

1. PCM:

Select this when you have no equipment

 

that can decode Dolby Digital (or MPEG-

 

2) signal.

 

When you play Dolby Digital (or MPEG-2)

 

sound track, the digital output are

 

converted to PCM Stereo.

2.Bitstream: Output Dolby Digital (or MPEG-2) audio as bitstream. Select this when your AV receiver or AV amplifier have Dolby Digital (or MPEG-2) Decoder.

Digital output setting is equally applied to both

NOTE Dolby Digital and MPEG-2 audio. LPCM sound track is always outputted as PCM. It has no rela-

tion with Digital Output setting.

Be sure to select the correct Digital Output or you will hear no sound or big noise.

DTS

1.Off: Doesn’t output DTS signal.

Select this when your AV receiver or AV amplifier does not have DTS decoder.

2.On: Outputs DTS Bitstream via digital output when you play DTS track.

Select this only when your AV receiver (or AV amplifier) have DTS decoder.

 

When DTS soundtrack is played, sound is not

NOTE

output from Analog Audio Output.

Dynamic Compression

Dynamic Range Compression : This is only active when a Dolby Digital signal is detected.

-On: When the Movie-soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

-Off: You can enjoy the movie with standard Dynamic Range.

Setting Up the Display (Video) Options

This function allows you to setup the TV screen settings.

1 With the unit in stop mode, press the MENU button on the remote.You can’t use the Setup functions during playback.

2 Select “Setup” using 34 buttons, then press the 1 or OK button.

DVD-RAM(VR)

Setup

System

Language

Audio

Video

Parental Control

 

MOVE

OK

RETURN

EXIT

 

 

 

 

 

 

 

 

 

 

 

 

 

3 Select “Video” using 34 buttons, then press the 1 or OK button. Video setup menu will be displayed.

4 Use 34 buttons to select the desired

sub menu and press the OK or 1 button.

 

DVD-RAM(VR)

 

Video

 

 

 

 

 

 

 

 

 

TV Aspect

: 16:9 Wide

 

 

 

 

3D Noise Reduction : Off

 

 

 

 

Front Display

: Bright

 

 

 

 

 

 

 

 

 

MOVE

OK

RETURN

EXIT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5 Use the 34 buttons to select the desired item. Then press the 1 or OK button.

 

 

Press the RETURN or 2 button to return to the

 

 

previous menu. Press the MENU button to exit

 

NOTE

 

 

the menu.

 

 

 

32 - English

Page 32
Image 32
Hitachi DV-RX7000E instruction manual Digital Output, Dynamic Compression, Output from Analog Audio Output