Hitachi DV-RX7000E Plug & Auto Set up, Connect the coaxial cable as indicated on

Plug & Auto Set up

Your DVD-Recorder will automatically set itself up when it is plugged in for the first time. TV stations and clock will be stored in memory. The process takes a few minutes. Your DVD Recorder will then be ready for use.

1 Connect the coaxial cable as indicated on page 15.

(Connecting Your DVD-Recorder to the TV using the Coaxial Cable)

2 Plug the DVD-Recorder in.

3 Press a Number button to select the language.

4 Start the auto setup.

Auto setup will be started.

Check antenna and TV cable connection.

OK Cancel

5 Select “Country” using the 342 1 buttons to select your country.

•Refer to following abbreviation table when selecting “Country”.

A (Austria)	NL (Netherlands)	S (Sweden)	PL (Poland)
B (Belgium)	I (Italy)	CH (Swiss)	CZ (Czech)
DK (Denmark)	N (Norway)	TR (Turkey)	Others
FIN (Finland)	P (Portugal)	GR (Greece)
D (Deutschland)	E (Spain)	HU (Hungary)

•The DVD-Recorder searches for the stations according to a preset preference list corresponding to the country that you have selected.

6 Auto Channel scan will be started.

Channel scan

Now, Scanning.

5%

•The number of stations automatically stored by the DVD- Recorder depends on the number of stations that it has found.

7 Start ACS (Auto Clock Setting) when Auto Channel scan is completed.

Auto channel scan completed successfully.

Press [OK] button to auto clock set.

OK Cancel

8 Wait until current date and time are displayed automatically. If you want to exit Auto clock setting, press MENU button.

Please wait, Now setting the clock.

If you want to exit clock setting,

press the [MENU] button.

No Disc

A

B

DK

FIN

D

MOVE

		Install
County Selection
NL	S	PL
I	CH	CZ
N	TR	Others

PGR

EHU

OK RETURN EXIT

24 - English