9.2 <

Installing accessories>
6Replace the control board cover and fasten the cover with the
screw.
7Reconnect the power cord and printer cable, and turn the machine
on.
Note
To release the memory module, pull the two tabs on the
sides of the slot outwards, then the module springs out.
Activating the added memory in the PS printer properties
After installing the memory module, you need to select it in the printer
properties of the PostScript printer driver in order to use it. This activation
is needed only the machine compatible with the PostScript driver.
1Make sure that the PostScript printer driver is installed on your
computer. For details about installing the PS printer driver, see
Software section
.
2Click the Windows Start menu.
3For Windows 2000, select Settings and then Printers.
For Windows XP/2003, select Printers and Faxes.
For Windows Vista, select Control Panel > Hardware and Sound
> Printers.
4Select the Samsung CLP-6xx Series PS printer.
5Click the right mouse button on the printer icon and select
Properties.
6Select Device Settings.
7Select the amount of memory you installed from
Printer Memory
in
the
Installable Options
section.
8Click OK.