Hitachi HV-D27A, HV-D37A 2WHITE BAL White balance mode, Agc Agc On/Off, 4 DTL：DTL level setup

2)WHITE BAL : White balance mode

•PRST 3200K : The white balance condition is optimized at a color temperature of 3200K.

•PRST 5600K : The white balance condition is optimized at a color temperature of 5600K.

• MEM	: White balance is automatically adjusted by the direct mode AWB button.
• AUTO	: The white balance condition is set through real time auto white balancing
	(automatic tracking white balance).
	The adjustment speed can be selected with A.WHITE SPEED of SUB MENU 1.
Note: In the Auto CAM mode, white balance is fixed at AUTO.
3) AGC : AGC ON/OFF
• ON	: Gain is adjusted automatically to compensate for scene brightness.
	The adjustment range is set by Limit from +6 to +24 dB in 1 dB steps.
• OFF	: Gain is fixed and manually adjustable in 1 dB steps from 0 to +24 dB.
4) DTL：DTL level setup
• OFF	: DTL OFF
• LOW	: DTL level decrease and a picture become soft.
• NORMAL	: DTL level is standard.
• HIGH	: DTL level increase and a picture become sharp.
• VARIABLE	: DTL level is VARIABLE value under a line.
	The DTL level can be set to in a range of -128 to 127. The degree of contour
	correction increases in the positive value setting, and it decreases in the negative
	value setting. For zero (0) setting, hold down both the L and R buttons for approx.
	two seconds.

13