Error message | Procedure |
AUTO BLACK：BAR | ・ Turn off the color bar. |
AUTO BLACK：NG | ・ Close the lens iris. |
| ・ Avoid taking an image of subject having high luminance such as the |
| sun, or decrease illumination on the microscope. |
| ・ Carry out AUTO BLACK again. If this message appears in repeated |
| attempts, it is necessary to inspect the inside of the camera. In this |
| case, notify your local Hitachi Denshi sales agent or Hitachi Denshi |
| service office |
White Balance Adjustment
Carry out white balance adjustment when the illumination condition (color temperature) is changed. Adjust the white balance when using the camera for the first time or after replacing the lens.
1.In the MENU mode, set up WHITE BAL: MEM.
2.Turn off the MENU screen to select the DIRECT mode.
3.Provide a proper aperture value of lens manually.
4.Put an white object in the subject image, and zoom it up.
5.Hold the AWB button pressed for about 2 seconds for automatic white balance adjustment. With MESSAGE RTN:ON, AUTO WHITE appears. At the end of successful adjustment AUTO WHITE:OK appears.
6.If white balance adjustment cannot be made, any of the following messages will appear. Take a proper procedure according to the error message, and then try white balance adjustment again.
43
