14. OUTPUT/SYNC
On this menu screen, you can make signal changeover for output to the
1)OUTPUT : Output mode changeover
•R, G, B :The R, G and B video signals are output to the
•Y,
• Y/C | :The Y/C and VBS signal is output to the |
2)COLOR BAR : Color bars ON/OFF
3)MONO : Monochrome (black and white) ON/OFF for the video output signal from the VIDEO connector Set to ON for monochrome. Setting ineffective during color bar.
4)Sync/HD out : Selects sync signal output from the rear panel multi connector.
5)SYNC ON G : G video signal synchronization ON/OFF (In the R/G/B mode only)
When output is RGB with Sync on and G on, Sync is added to the G video signal.
6)GL IN : Impedance changeover of input to the GL IN connector.
•HIGH : The high impedance level is provided.
•75Ω : An impedance of 75 ohms is provided.
Note: When power to the camera is turned off, the high impedance level is provided. So, do not use this function in a system where power is turned off for the camera unit only.
35