Hitachi HV-D37A, HV-D27A operation manual Other Func

16. OTHER FUNC

1)NEGA : NEGA image ON/OFF

At the ON setting, the output video becomes negative image.

2)FLARE : Flare compensation on/off

Corrects for extraneous reflections in the optical and CCD systems which end to weaken bright image components. Normally set to on.

3)FLARE LEVEL: Setting range is -128 (smaller) to 127 (larger compensation).

4)KNEE POINT : Use L and R to set in the range -128 (smaller) to 127 (larger). Normally set to where gradation appears above 100% video level.

5)WHITE CLIP : Sets white clip level

Use L and R to set in the range of -128 (lower) to 127 (higher) clip level. Normally set for clip at about 110% video level. Adjust when there is excess video level from the equipment interface.

6)MESSAGE RTN : Message display ON/OFF

•	ON	: A message indicating the result of AWB/ABB execution in the DIRECT mode
		is displayed.
•	OFF	: A message indicating the result of AWB/ABB execution in the DIRECT mode
		is not displayed.

7)REMOTE : Set remote control baud rate

Use R and L to set for 2400, 4800, 9600 or 19200 bps. Set to 9600 bps when using the optional RC-Z3 remote control box.

38